ver : a_5 update : 2016.04.19 ac-dc power module auc series 7 watts http://www.archcorp.com.tw tel: +886-2-26989508 fax: +886-2-26981319 -1- electrical specifications all specifications valid at normal in put voltage, full load and +25c after warm-up time unless otherwise stated. model no. ( single output ) auc-5s AUC-12S auc-15s auc-24s max output wattage (w) 6.3w 7w voltage 90-264 vac or 120-370 vdc, ? n ? to dc ? + ? ; ?l ? to dc ? - ? frequency (hz) 50 / 60 hz current (full load) 180 ma max. (115 vac) / 110 ma max. (230 vac) inrush current (note 4.) 20 a max. (115 vac) / 40 a max. (230 vac) leakage current 0.25 ma max. (at <240 vac). input external fuse (mandatory) 2 a slow blow type voltage (v.dc.) 5v 12v 15v 24v voltage accuracy 2% current (ma) max 1260 583 466 292 line regulation (ll-hl) (typ.) 0.5% load regulation (10-100%) (typ.) 1%. minimum load 0% maximum capacitive load 3300uf 1000uf 470uf 68uf ripple <100mv (vp-p) <200mv (vp-p) noise <150mv (vp-p) <200mv (vp-p) efficiency (at 230 vac) 77% 80% 80% 80% output hold-up time (at 230 vac) 30 ms min. over power protection hicc up technique, auto-recovery protection short circuit protection hiccup mode, indefinite (automatic recovery) isolation input-output (v.ac) 3000v operating temperature -40c?+70c ( with derating ) storage temperature -40c?+85c temperature coefficient 0.02%/c humidity 95% rh environment mtbf >500,000 h @ 25c (mil-hdbk-217f) dimension (l x w x h) 1.08 x 1.08 x 0.736 inches ( 27.4 x 27.4 x 18.7 mm ) tolerance ? 0.5 mm case material plastic resin (flammability to ul 94v-0) weight 26 g physical cooling method free air convection safety agency approvals ce, ul, cul emi (conducted & radiated emission) en 55022 class b emc ems (noise immunity) en 55024 key features ? switching power module for pcb mountable ? fully encapsulated plastic case ? universal input range 90-264vac, 50 / 60 hz ? no-load watts < 0.1w ? ultra compact size: 1.08? x 1.08? x 0.736? inches ? isolation class ii ? ce, cb, ul approval ? 3-year product warranty
ver : a_5 update : 2016.04.19 ac-dc power module auc series 7 watts http://www.archcorp.com.tw tel: +886-2-26989508 fax: +886-2-26981319 -2- note 1. all specifications valid at normal input voltage, full load and +25c after warm-up time unless otherwise stated. 2. ripple & noise are measured at 20mhz of bandwidth with 0.1uf & 47uf parallel capacitor. 3. it's necessary varistor 14s471k at l / n input side in parallel. 4. it's necessary 10r / 15 thermistor at l input side in series connection. 5. please refer to our pdf file "ac-dc applic ation" on our website: www.archcorp.com.tw output noise the output noise is measured with 47 ? f tantalum capacitor and 0.1 ? f ceramic capacitor across output. block diagram derating mechanical dimension ( top view ) customer is recommended to reserve pad points of 1.0mm in diameter for ac in (l) and ac in (n) pin# single 1 ac in (n) 2 ac in (l) 3 +dc out 4 -dc out
|
